Setting Up Internet Access; Configuring Tcp/Ip In Windows Xp; Configuring Tcp/Ip In Windows Vista - Motorola SURFboard SVG1501E User Manual

Setting Up Internet Access

After installing the SVG1501, check that you can connect to the Internet. You can
retrieve an IP address for your computer's network interface using one of the following
options:
•
Retrieve the statically-defined IP address and DNS address
•
Automatically retrieve the IP address using the Network DHCP server
The Motorola SVG1501 Wireless Voice Gateway provides a DHCP server on its LAN.
Motorola recommends that you configure your LAN to obtain the IPs for the LAN and
DNS server automatically.
Make sure all computers on your LAN are configured for TCP/IP. After configuring TCP/IP
on your computer, you should verify the IP address.
Note: For UNIX or Linux systems, follow the instructions in the
applicable user documentation.

Configuring TCP/IP in Windows XP

1. Open the Control Panel.
2. Double-click Network Connections to list the Dial-up and LAN or High-Speed
Internet connections.
3. Right-click the network connection for your network interface.
4. Select Properties from the drop-down menu to display the Local Area Connection
Properties window. Be sure Internet Protocol (TCP/IP) is checked.
5. Select Internet Protocol (TCP/IP) and click Properties to display the Internet
Protocol (TCP/IP) Properties window.
6. Select Obtain an IP address automatically and Obtain DNS server address
automatically.
7. Click OK to save the TCP/IP settings and exit the TCP/IP Properties window.
8. Close the Local Area Connection Properties window and then exit the Control Panel.
9. When you complete the TCP/IP configuration, continue with
in Windows

Configuring TCP/IP in Windows Vista

1. Open the Control Panel.
2. Click Network and Internet to display the Network and Internet window.
3. Click Network and Sharing Center to display the Network and Sharing Center
window.
4. Click Manage network connections to display the LAN or High-Speed Internet
connections window.
5. Right-click the network connection for the network interface you want to change.
6. Click Properties to display the Local Area Connection Properties window.
2 • Getting Started
XP.
B
Verifying the IP Address
15