Pl 7.30 Bypass Tray And Left Hand Door Assembly - Xerox WC5632 Service Manual

PL 7.30 Bypass Tray and Left Hand
Door Assembly
Item Part Description
1 050K67881 Bypass tray and left hand door
assembly (32-55 ppm) (REP 7.5)
2 – Left hand door (P/O PL 7.30 Item 1,
PL 7.30 Item 27)
3 – Left hand door interlock (S01-305)
(Not Spared) (110E93440 not in
solos)
4 121E25680 Feed solenoid (SOL08-050) (REP
8.9)
5 – Feed head assembly (P/O PL 7.30
Item 1, 27) (REP 8.19)
6 – Feed head (P/O PL 7.30 Item 5)
7 130E12060 Bypass tray empty sensor (Q07-
335) (REP 8.23)
8 029E50160 Hinge pin
9 – Spring retainer (P/O PL 7.30 Item
11)
10 809E57640 Spring drive gear
11 807E05311 Drive gear assembly (REP 8.20)
12 – Bypass tray (P/O PL 7.30 Item 1,
27)
13 809E84190 Ground spring
14 – Feed head top cover (P/O PL 7.30
Item 5)
15 – Feed roll (P/O PL 7.30 Item 21)
(REP 8.21)
16 – Nip roll (P/O PL 7.30 Item 5)
17 – Left hand door cover (P/O PL 7.30
Item 2)
18 – Retard pad bracket (P/O PL 7.30
Item 21)
19 – Retard pad assembly (P/O PL 7.30
Item 21)
20 – Retard pad spring (P/O PL 7.30
Item 21)
21 059K39862 Feed roll and retard pad assembly
(REP 8.22)
22 – Solenoid spring (P/O PL 7.30 Item
4)
23 – Interlock cover (Not Spared)
24 130E12760 Tray 1/2 feed sensor (Q08-101)
(68-87 ppm) (REP 8.24)
25 130E12770 Wait Sensor (Q08-100, Q08-110)
(65-87 ppm) (NOTE) (REP 8.17)
26 – Nip roll (Not Spared)
27 050K67891 Bypass tray and left hand door
assembly (65-87 ppm) (REP 7.5)
28 – Pre-reg nip roll spring (P/O PL 7.30
Item 29)
29 604K55500 Skew bypass tray spares kit (x2
spring) (W/TAG 048)
30 – Nip roller (Not Spared)
31 – Shaft (Not Spared)
32 – Lower cover (Not Spared)
NOTE: Refer to PL 8.15 Item 3 for the 32-55 ppm wait
sensor.
WorkCentre 5687 Family
September 2008
5-35
Parts Lists
PL 7.30