Pl 14.25 Electrical Components (32-55 Ppm) - Xerox WC5632 Service Manual

PL 14.25 Electrical Components (32-
55 ppm)
Item Part Description
1 – PWB Cover (Not Spared)
2 127K55800 Scan motor (REP 14.11A)
3 130E12310 Document size sensor 1 (Q14-315),
Document size sensor 2 (Q14-320)
(REP 14.3A)
4 960K34310 Scanner PWB (REP 14.5A)
5 962K12190 Image processing module/CCD
PWB PJ125-PJ110 harness
6 130E12300 DADH Closed switch (Q05-300)
(REP 14.4A)
7 030K79630 Front end block (REP 14.9A)
8 030K79620 Rear end block (REP 14.9A)
9 122K02290 Exposure lamp (REP 14.9A)
10 962K12210 Lamp ribbon harness
11 960K34340 Fuse (USSG) (REP 14.2A)
12 960K34320 Exposer lamp inverter PWB (REP
14.2A)
13 152S06184 Image processing module/scanner
driver PWB/CCD PWB (PJ455 &
PJ450-PJ135) harness
14 – Scanner drive belt (P/O PL 14.20
Item 1)
15 – Sensor bracket (Not Spared)
16 130K75130 Scan carriage home sensor (Q14-
100) (REP 14.7A)/Input module
angle sensor (Q14-310) (REP
14.8A)
17 020K12510 Scan idler pulley (REP 14.10A)
18 030K79640 Scan motor bracket (REP 14.11A)
19 – CCD PWB (P/O PL 14.20 Item 1)
20 – Actuator spring (Not Spared)
21 110K14010 Input module angle sensor actuator
22 – Actuator support (Not Spared)
23 – CCD PWB/Scanner PWB harness
(P/O PL 14.20 Item 1)
24 – Scan cable (Not Spared) (REP
14.12A)
NOTE: Refer to ADJ 14.1A for the optics cleaning procedure.
WorkCentre 5687 Family
September 2008
5-167
Parts Lists
PL 14.25