Dirt Cup; Filters - Hoover UH71003 Owner's Manual

Table of Contents

Advertisement

Available languages

Available languages

DIrT CuP

when to empty
4.2 To maintain optimal performance, empty the dirt cup before the dirt cup
reaches the max line (B). Place the vacuum in the upright position before
removing the dirt cup.
warnInG
!
To reduce the risk of personal injury - Unplug before cleaning or servic-
ing. Do not use vacuum without dirt cup or filters in place.
Very fine materials, such as face powder or cornstarch, may seal the filter
and cause a reduction in performance. When using the vacuum for this
type of dust, empty the cup and clean the filters often.
How to empty
4.3 Press dirt cup
4.3
release button (C) and
C
pivot cup out.
4.4 Hold dirt cup over
trash receptacle, push
dirt cup door release
lever (D) to open dirt
cup door (E).
Close dirt cup door (E).
Press firmly to secure.
4.5 Place bottom of dirt cup into vacuum body first. Pivot dirt cup into vacuum
body and press firmly until it locks into place.

FIlTers:

when to Clean
To maintain optimal performance, filters should
be cleaned at least every two months under
normal use.
warnInG
!
!
To reduce the risk of personal injury - Unplug
before cleaning or servicing. Do not use
vacuum without dirt cup or filters in place.
rinsable Filter: How to Clean
Remove dirt cup as described in Fig. 4.3.
4.6 Twist the dirt cup handle counterclockwise to
open and remove lid.
4.7 Pull tab to remove rinsable filter.
Rinse with water for two minutes or until water runs
clear. Then squeeze out excess water. Allow 24
hours for filter to dry completely.
Replace filter, tab side out.
4.8 Replace dirt cup lid and twist clockwise until
locked in position.
Replace dirt cup as described in Fig 4.5.
IMPOrTanT
Allow filter to dry completely before replacing.
Dry filter on edge so air circulates on both sides
of filter. This may take up to 24 hours.
4.2
!
b
4.4
4.5
E
D
4.7
4.6
4.8
what to Buy: rinsable Filter
When used and maintained properly, your
Rinsable Filter should not need replacement within
the warranty period. If desired, additional filter is
available at Hoover.com or call 1-800-944-9200.
Ask for Hoover
Part No. 304087001.
®
9
Actual model may vary from images shown.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents