Motorola SURFboard DOCSIS SB6120 User Manual page 17

2 INSTALLATION
6. Perform the procedures for
You may wall mount your SB6120 by following the steps on the following pages.
7. Check that the lights on the front panel cycle through this sequence:
POWER Turns on when AC power is connected to the SB6120.
Indicates that the power is connected properly.
RECEIVE
Flashes while scanning for the downstream receive channel.
Changes to solid green when the receive channel is locked.
SEND Flashes while scanning for the upstream send channel.
Changes to solid green when the send channel is locked.
ONLINE Flashes during SB6120 registration and configuration.
Changes to solid green when the SB6120 is registered.
Optional LED operation available in some locations:
RECEIVE and SEND lights are blue when the downstream and upstream channels
are connected with bonded channels.
Configuring TCP/IP.
9