Craftsman C950-52122-0 Owner's Manual page 91

Assemble Handle
1. Install lower handle bolts 3 turns (G).
2. From back of unit, position handle so that control levers face
front of unit (H).
3. Slide handle slots onto lower handle bolts (J).
G
J
en
4. Position handle so that cable ends (K) easily install into
5. Install upper handle bolts. Tighten all four handle bolts
5/16" x 1"
G
1/2˝
H
control levers (M).
IMPORTANT! Cables MUST be routed as illustrated below.
securely (N).
K
K
M
N
16 lb-ft
(22 Nm)
K
K
M
N
3