Craftsman C950-52122-0 Owner's Manual page 90

Assemble Shift Hub
1. Install shift hub (A) onto shaft EXACTLY as shown. Shift hub
lever MUST face toward outside of unit.
2. Align holes in shift hub and shaft, then install clevis pin (B) as
shown.
3. Install cotter pin (C) through hole in clevis pin.
4. Bend the end of the cotter pin (D) using a needle nose pliers
to prevent it from falling out.
5. Install spring end of control cable (E) onto shift hub lever as
shown.
6. Lay left and right side control cables (F) on the ground behind
the unit.
2
B
A
C
D
F
E