Table of Contents
Advertisement
web viewer
Item
Profile type
f
Screen
g
Optimization
Fix the resolution
h
Full Screen
i
Capture
j
Manual recording
k
Audio/Microphone
l
Control
Alarm output
m
External PTZ
n
Hide the context
o
menu
46_ web viewer
You can select a profile type in <Video profile> under the <Basic> setup menu.
When the Web Viewer is connected, the profile information currently using is
`
displayed.
Afterimages can be displayed on the screen under the following conditions if the
J
video is played in the monitoring page:
-
The resolution is changed due to a profile change.
-
Incoming data is being slowed due to a network delay when the profile is
changed.
-
The web browser window size and location is changed.
The video size of the camera will switch to as big as the Web browser.
Regardless of the resolution setup configured in the camera, it sets the resolution to
640x480. Press it again to switch back to the default resolution.
Switch the current video to the maximum size of the monitor.
Saves the snapshot as an image file in the .jpg format.
Users can save their video in the micro SD memory card or NAS on their own.
To take video manually, change the recording setting first. Refer to "Storage" for
`
how to set recording (page 95).
Enable Audio and Microphone are control the Audio volume.
Only the Audio volume can be controlled.
`
Activate the Alarm Out port.
Connect the external PTZ to the RS-485 terminal and control the PTZ camera lens
direction with the arrow keys.
The pan/tilt operations will be enabled only if the camera is connected to a pan/
`
tilt-compliant receiver.
The left-corner context menu will disappear but only the menu icon.
Description
Advertisement
Table of Contents
