Honeywell MX7 Tecton User Manual page 219

Server Contact
Note: Your MX7 Tecton screen display may not be exactly as shown above. Contact
1) for upgrade availability and version information.
Setting
Sync Clock
Contact
Periodic Update
Wakeup device if suspended
Reboot before attempt
Require external power
Use relative offset
Function
Reset the time on the MX7 Tecton based on the time on the Mobile Device Server
host PC.
On Startup – Connect to the Mobile Device Server when the Enabler is accessed.
On Resume – Connect to the Mobile Device Server when resuming from Suspend
mode.
On IP Change – Connect to the Mobile Device Server when the IP address of the
MX7 Tecton changes.
On Ext. Power – Initiate connection to the Mobile Device Server when the device
is connected to an external power source, such as based on a docking event.
Allows the administrator to configure the Enabler to contact the Mobile Device
Server and query for updates at a regular interval beginning at a specific time.
If the time interval for periodic contact with the Mobile Device Server occurs, a mo-
bile device that is in Suspend Mode can wakeup and process updates.
Reboot mobile device before attempting to contact Mobile Device Server.
Only connect when the mobile device has external power.
Dimmed.
Technical Assistance (page 16-
10 - 9