Initial Setup; Initial Installation; Audio/Video Source Selection; Dtv Mode Operations - ProScan EP5585 User Manual

17

3. Initial Setup

3.1. Initial Installation

The first time the unit is turned on or anytime the system is restored to
the defaulted settings, the Initial Installation wizard will be displayed on the
screen.
Conect the antenna cable to the RF connector at the connections panel
and follow the steps displayed on the screen to set up the system basic
settings (Language, Cable, etc.) and start an auto search of TV channels.

3.2. Audio/Video Source Selection

Turn on the TV by pressing the POWER button on TV
or on the remote control, press SOURCE and use the
direction buttons to select the desired source
/
depending on the equipment you have connected (AV,
HDMI, VGA) or choose TV to enter these mode.
3.3. DTT Mode Operations
Use CH+ or CH- buttons to tune the desired channel, or enter the channel
number directly using the numeric keypad. Press OK to display on screen the
list of TV and radio channels (press the
show only the DTV, the analog TV channels, etc.).
Use MTS button to select the audio language broadcasting, CC button to
show or hide subtitles on screen and FAV button to see a list of your favorite
channels.

4. SETTINGS

Source Select
TV
AV
YPbPr
HDMI1
HDMI2
HDMI3
PC
buttons to sort by group and
/
18