Rear Panel - Motorola SURFboard Cable Modem User Manual

Introduction Before You Begin
1
2
3
4
5
Home Print
Installation & Configuration

Rear Panel

The rear panel provides cabling connectors, status lights, and the power receptacle.
Key Item
1
2 USB
3 •
4 CABLE The CABLE port provides a connection to the
5 POWER The POWER connector provides power to the cable modem.
X
Exit
Troubleshooting
Description
The Ethernet port provides a connection to Ethernet equipped computers
using a cable terminated with an RJ-45 connector. The adjacent lights are:
LINK/ACT —
On when the Ethernet connection is available. It blinks during
data transfer.
100 — O
n if there is a 100Base-T link and off for a 10Base-T link.
The USB port provides a connection to
If you experience a problem, you can push this recessed button to reset the
cable modem (see "Troubleshooting"
30 minutes because the cable modem must find and lock on the appropriate
communications channels.
3
SURFboard Cable Modem User Guide
FAQ Glossary License
USB equipped computers.
on page 35). Resetting may take 5 to
coaxial cable (coax) outlet.