Motorola SURFboard Cable Modem User Manual page 15

Introduction Before You Begin
Caution
Do not connect both the Ethernet
and USB cables to the same
computer.
Connect to either
Ethernet or USB
Computer SURFboard cable modem
Home Print
Installation & Configuration
Cabling and Startup for a Single User, continued
6
Connect your computer to the cable modem using USB or Ethernet:
USB: Be sure the SURFboard Cable Modem CD-ROM is inserted in your CD-ROM
drive. Connect the USB cable to the USB port on the cable modem. Connect the
other end to the USB port on your computer. Then perform
Driver"
Ethernet: Connect the provided straight-through Ethernet cable to the Ethernet
connector on the cable modem. Connect the other end to the Ethernet port on your
computer. Ethernet users do not need to set up USB.
7
Perform the procedures for
X
Exit
Troubleshooting
on page 11.
"Configuring TCP/IP"
10
SURFboard Cable Modem User Guide
FAQ Glossary License
"Setting Up a USB
on page 22.