Power Moonroof Re-Set Procedure; Sunshade - Mazda 2014 CX-5 Owner's Manual

Hide thumbs Also See for 2014 CX-5:

Table of Contents

Before Driving

To close to the desired position, press the

tilt/slide switch in the forward direction.

qPower Moonroof Re-set Procedure

If the battery is disconnected, the

moonroof will not operate. The moonroof

will not operate correctly until it is re-set.

Carry out the following procedure to re-

set the moonroof and resume operation:

1. Switch the ignition ON.

2. Press the tilt switch, to partially tilt

open the rear of the moonroof.

3. Repeat Step 2. The rear of the

moonroof tilts open to the fully open

position, then closes a little.

If the re-set procedure is performed while the

moonroof is in the slide position (partially

open) it will close before the rear tilt opens.

The sunshade can be opened and closed

The sunshade opens automatically when

the moonroof is opened, but must be

closed by hand.

Ø The sunshade does not tilt. To

avoid damaging the sunshade, do

not push up on it.

Ø Do not close the sunshade while

the moonroof is opening. Trying to

force the sunshade closed could