Mazda 2013 Mazda3 Owner's Manual page 387

Interior Comfort
Bluetooth® (Type B)
NOTE
When activating the Phone Menu from the
l
Main Menu, the user is informed of the
available options (Call, Dial, Redial, Call
back, Setup or Emergency) via voice
navigation.
For voice recognition details with the
l
navigation system, refer to the separate
"NAVIGATION SYSTEM Owner's
Manual".
Ending Voice Recognition
Use one of the following methods:
Press and hold the talk-button.
l
Press the hang-up button.
l
Skipping Voice Guidance (for faster
operation)
Press and release the talk-button.
NOTE
®
The Bluetooth Hands-Free system is
l
operable several seconds after the ignition
is switched to ACC or ON (requires less
than 15 seconds).
When operating the audio unit or the A/C
l
while using Bluetooth
beep sounds or voice guidance (audio unit)/
cannot be heard.
Tutorial
The tutorial explains how to use
®
Bluetooth Hands-Free.
The available tutorial items are General,
Phone, and Audio.
To activate the tutorial, do the following:
1. Press the talk button.
2. Prompt: "Ready"
3. Say: [Beep] "Tutorial"
4. Prompt: "Tutorial"
5. Say: [Beep]
"XXXXX... (Tutorial item)"
6-146
®
Hands-Free, the
6. Follow the prompts to receive the
appropriate voice guidance
instructions.
Commands useable anytime during
voice recognition
"Help" , "Go Back" , "Cancel" ,
"Display OFF/Display ON" are
commands which can be used at anytime
during voice recognition.
Help function use
The help function informs the user of all
the available voice commands under the
current conditions.
1. Say: [Beep] "Help"
2. Follow the prompts to receive the
appropriate voice guidance
instructions.
Returning to previous operation
This command is for returning to the
previous operation while in the voice
recognition mode.
Say: [Beep] "Go Back"
Cancel
®
The Bluetooth Hands-Free system
transitions to standby status if the
following operation is performed while
the system is activated.
Say: [Beep] "Cancel"
Display OFF/Display ON
The audio unit display can be switched
off/on by voice recognition operation.
Say: [Beep] "Display OFF" (or
"Display ON")