Specifications; Initial Settings; Contrast; Carton Contents - Brother P-touch D210 User Manual

LCD and Keyboard
1 1
2
3
8
9
10
11
12
13
14
15
16
17
18
The default setting is [English].
1. Size 15. Font key
2. Cursor 16. Character key
3. Underline/Frame 17. Caps key
4. Width 18. Shift key
5. Style 19. Tape cutter lever
6. Caps 20. Print key
7. Label Length 21. Preview key
If a specific label length 22. Frame key
has been selected, 23. Symbol key
also appears. 24. Template Library key
8. OK key 25. Backspace key
9. Cursor key: Right (Use 26. Enter key
with Shift key to go to 27. Accent key
end of the text.) 28. Space key
10. Cursor key: Left (Use
with Shift key to go to
top of the text.)
11. Escape key
12. Power key
13. Menu key
14. Label key

Carton Contents

P-touch
Starter Tape Cassette
AC adapter (optional on the D210)
User's Guide
4
5
6
7
19
20
21
22
23
24
25
26
27
18
28
NOTE
• The LCD shows one row of 15 characters;
however, the text you enter can be up to 80
characters in length.
• While selecting the settings, press the Space key
to go back to the default item.
• Pressing the Preview key displays a generated
image of the label, which may differ from the
actual label when printed.
• The label length shown on the LCD may differ
slightly from the actual label length when printed.

Specifications

Dimensions: Approx. 157(W) x 150(D) x 68(H) mm
(W x D x H)
Weight: Approx. 490 g
(without batteries and tape cassette)
Power supply: Six AAA alkaline batteries (LR03)
Six AAA Ni-MH batteries (HR03)*
2
AC adapter (AD-24ES)*
Tape cassette: Brother TZe tape (width)
3.5 mm, 6 mm, 9 mm, 12 mm
1
* Visit the Brother Solutions Center at
http://support.brother.com for the latest
information about the recommended batteries.
2
* The AC adapter is optional on the D210.
Initial Setup
1
Turn your machine on.
Insert six AAA batteries or connect the AC
adapter (AD-24ES), and then press
2
Set the language.
/ [Language]
/ [English/Español/Français/
Hrvatski/Italiano/Magyar/Nederlands/
Norsk/Polski/Português/Portug. (BR)/
Română/Slovenski/Slovenský/Suomi/
Svenska/Türkçe/Čeština/Dansk/Deutsch]
.
3
Set the unit of measurement.
The default setting is [mm].
/ [Unit]
/ [inch/mm]
NOTE
• The machine automatically turns off if you press no
key within five minutes.
• To cancel any operation, press
• After pressing , "Accepted" appears for
about one second.
LCD Contrast Adjustment
This function allows you to set the brightness of the
LCD. You can select from five levels of brightness.
The default setting is [0].
/ [LCD Contrast]
/ [-2/-1/0/+1/+2]
• To change back to the default setting, press the
Space key.
• After pressing , "Accepted" appears for
about one second.
1
Accessories
Tape Visit the Brother Solutions Center
Cassettes: at http://support.brother.com/
for the latest information about
.
consumables.
AC Adapter: AD-24ES
Cutter Unit: TC-4 (replacement)
If the cutter blade becomes blunt after repetitive use
and the tape cannot be cut cleanly, replace with a
new cutter unit (supplies code TC-4) you can obtain
from an authorised Brother dealer.
 Replacing the Cutter Unit
Pull out the two sections of the cutter unit
1.
(green) in the direction of the arrows shown in
the illustration.
.
.
Install a new cutter unit. Push it in until it locks
2.
into place.
WARNING
Do not touch the cutter blade directly with your
fingers.