About The Audio Connection; About The Video Converter - Pioneer Elite SC-89 Operating Instructions Manual

03

About the audio connection

Types of cables and terminals
HDMI
Digital (Coaxial)
Digital (Optical)
RCA (Analog)
(White/Red)
! With an HDMI cable, video and audio signals can be transferred in high quality over a single cable.
! For HD audio, see About HDMI on page 34 .
Transferable audio signals
HD audio
Conventional digital audio
Conventional analog audio

About the video converter

The video converter ensures that all video sources are output through the HDMI OUT 1 and HDMI OUT 2
terminals.
If the TV is only connected to the receiver's composite VIDEO MONITOR OUT jacks, all the other video devices
must be connected through composite connections.
If several video components are assigned to the same input function (see
the converter gives priority to HDMI, component, then composite (in that order).
Terminal for connection
with source device
HDMI IN
Y P P
B R
COMPONENT
VIDEO IN
VIDEO IN
Notes
! With factory default settings, video from the video cable or component cable will not be output from the HDMI
terminal. To output video, you must switch video input to the device connected with the video cable or compo-
nent cable and set V.CONV to ON (page 83
! The only exception is HDMI: since this resolution cannot be downsampled, you must connect your monitor/TV
to the receiver's HDMI output when connecting this video source.
! If the video signal does not appear on your TV, try adjusting the resolution settings on your component or dis-
play. Note that some components (such as video game units) have resolutions that may not be converted. In
this case, try switching Digital Video Conversion (in
! The signal input resolutions that can be converted from the component video input for the HDMI output are
480i/576i, 480p/576p, 720p and 1080i. 1080p signals cannot be converted.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
33
Connecting your equipment
The Input Setup menu
Terminal for connection
with TV monitor
HDMI OUT
Y P P
B R
COMPONENT VIDEO
MONITOR OUT
Video signals
VIDEO
can be output
MONITOR OUT
).
Setting the Video options on page 83 ) OFF.
on page 52 ),