Panasonic SC-VK880 Operating Instructions Manual page 37

 Sound
No sound.
Sound is distorted.
Effects do not work.
Humming heard during
play.
 Menus
The SETUP menu cannot
be accessed.
 Picture incorrect
Picture distorted.
No picture.
The television may display
incorrectly or colours
appear faded.
DivX
Picture stops.
Menus not displayed
correctly.
Auto zoom function does
not work well.
When playing PAL disc,
picture distorted.
 Progressive video
There is ghosting when
progressive output is on.
Picture not in progressive
output.
 Listening to the radio
Noise is heard.
"ST" flickers or doesn't
light.
Sound is distorted.
A beat sound is heard.
A low hum is heard during
AM broadcasts.
 Using the cassette deck
Poor quality sound.
Recording is not possible.
 Disc trays
Disc tray(s) cannot open.
"CHGR ERR" is displayed.
• Check the connections.
• Turn the volume up.
• There may be a pause in sound when you change the play speed.
DivX
• Audio may not be output due to how files were created.
• Noise may occur when playing WMA.
• Some audio effects do not work or have less effect with some discs.
• An AC mains lead or fluorescent light is near the cables. Keep other appliances and
cords away from this unit's cables.
• Select "DVD/CD" as the source.
• Cancel program and random play.
• Some distortion is normal during SEARCH.
• Ensure that the unit is connected directly to the television, and is not connected
through a video cassette recorder.
• Change "SOURCE SELECT" in On-Screen Menu 2 (Video).
• Check the connection.
• Ensure the television's video input setting is correct.
• The unit and television are using different video systems.
– Use the multi-system or NTSC television.
• The system used on the disc does not match your television.
– PAL discs cannot be correctly viewed on an NTSC television.
– This unit can convert NTSC signals to PAL 60 for viewing on a PAL television
("NTSC DISC OUT" in "VIDEO" menu).
• Picture may stop if the DivX files are greater than 2 GB.
• Change the zoom ratio to "NORMAL".
• Change "TV ASPECT" in "VIDEO" menu.
• Turn off television zoom function.
• Use the other preset aspect ratios or manual adjustment.
• Zoom function may not work well, especially in dark scenes and may not work
depending on the type of disc.
• Set "TRANSFER MODE" in On-Screen Menu 2 to "AUTO".
• This problem is caused by the editing method or material used on DVD-Video,
but should be corrected if you use interlace output. Change "VIDEO OUT (I/P)" in
"VIDEO" menu to "INTERLACE".
• Select "PROGRESSIVE" in "VIDEO OUT (I/P)" in "VIDEO" menu.
• If the unit is connected to the television through VIDEO OUT terminal, output will be
interlace, even if "PRG" is displayed.
• Adjust the position of the FM or AM antenna.
• Use an outdoor antenna.
• Press [PLAY MODE] to select "MONO".
• Turn the television off or separate it from the unit.
• Switch to either BP 1 or BP 2.
• Separate the antenna from other cables and cords.
• Clean the heads.
• If the erasure prevention tabs have been removed, cover the holes with adhesive
tape.
• Press [^/I] to release the jammed tray(s) as the unit will switch off. Switch it on
again and the tray(s) will initialize to the previous tray(s) condition.
• If this still does not fix the problem, please consult the dealer.
DivX
10, 11
22, 23
Page
10
–
21
–
–
–
–
Page
–
19
Page
17
11
22
–
–
–
22
23
–
23
–
22
Page
24
24
11
Page
11
11
26
–
26
–
Page
39
27
Page
16
37
–