Simple Setup; Television, Antenna And Ac Mains Lead Connections - Panasonic SC-VK880 Operating Instructions Manual

Simple setup

Television, antenna and AC mains lead connections

Connect the AC mains lead after all other connections are complete.
Conserving power
The unit consumes power (approx. 0.4 W) even when it is turned off with [^] (main unit: [8]). To save power when the unit is not to
be used for a long time, unplug it from the household AC power socket. You will need to reset some memory items after plugging in
the unit.
Speaker connections
Connect the speakers to the main unit with the terminals of the same
colour.
Speaker
 Front speaker (L)
 Front speaker (R)
 Surround speaker (L)
 Surround speaker (R)
 Center speaker
 Subwoofer
Before connecting the
AC mains lead, set the
voltage.
Voltage Selector
Use a flat-head screwdriver
to set the voltage selector on
the back of the main unit to
the appropriate position for
the area in which this system
is used.
AC mains lead
To household mains
socket
10
Terminal/connector colour
White
White
Blue
Blue
Green
Purple
e.g. Front speaker (L)
Insert fully
Insertion of Connector
Even when the connector is perfectly inserted, depending on the type of inlet
used, the front part of the connector may jut out as shown in the drawing.
However there is no problem using the unit.
Connector
Note
• The included AC mains lead is for use with this unit only. Do not use it with
other equipment.
• Do not use an AC mains lead from other equipment.
FM indoor antenna
Tape the antenna where reception is best.
Adhesive
tape
Appliance inlet
Approx. 3.5 mm
Please refer to "Using an
external unit" on page 35
for more information on
AUX connection.
TO SB-PS880 (SURROUND)
TO SB-PF880 (FRONT)
TO SB-PC880 (CENTER)
TO SB-WAK780 (SUBWOOFER)