Operation And Display Section For Remote Control - Mitsubishi Heavy Industries SRR25ZM-S User Manual

Operation and display section for remote control

OPERATION MODE select button
Each time the button is pressed, the
mode changes.
Page 11,13
TEMPERATURE button
This button sets the room temperature.
HI/ECO button
This button changes the HIGH POWER/
ECONOMY operation.
Page 21
SILENT button
This buttion changes the SILENT
operation.
Page 22
ON TIMER button
This button selects ON TIMER operation.
Page 15
OFF TIMER button
This button selects OFF TIMER
operation.
Page 14
WEEKLY button
This button switches the WEEKLY
TIMER to ON/OFF.
Page 17
CLEAN switch
This switch selects the CLEAN
operation.
Page 23
SLEEP button
This button selects SLEEP operation.
Page 14
Display in OFF status
The current time, day of the week, and present OPERATING MODE are displayed while the air-conditioner is turned off.
Transmission procedure
When each button on the remote control is pressed – with the remote control pointing towards the unit
display section, a signal is transmitted.
When the air-conditioner receives the signal correctly, it will beep.
[View with the cover opened]
• The above illustration shows all controls, but in
practice only the relevant parts are shown.
– 10 –
Transmission section
ON/OFF (luminous) button
Press to start operation, press again
to stop.
FAN SPEED button
Each time the button is pressed, the fan
speed changes.
Page 12
AIR FLOW (UP/DOWN) button
This button changes the air fl ow (up/
down) direction.
This button is not used.
(Air fl ow direction adjustment can not be
performed.)
Page 12
NIGHT SETBACK button
This button sets NIGHT SETBACK
operation.
Page 22
SET/Child Lock button
Use this button to set the timer and
Child Lock.
Page 9
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
TIMER button
This buttions is used for setting the
current time and timer function.
PROGRAM button
This button sets WEEKLY TIMER.
Page 17
ACL switch
Switch for resetting microcomputer.
Page 8
TIME SET UP switch
This switch is for setting the time.
Page 11
Reception
pip