1. From home, tap Apps
2. Tap Bluetooth.
The Bluetooth settings open.
Bluetooth Settings Operations
Enable Bluetooth: In Bluetooth settings, tap the slider at the top of the menu.
n
Alternately, drag the status bar down to display the notifications panel and then tap
l
Bluetooth to turn Bluetooth on or off.
Pairing Bluetooth Devices: Make sure the other devices are set to be discovered. From
n
Bluetooth settings, tap the device name in "Available devices" and follow the onscreen
instructions.
Depending on the device, you may be required to enter or accept a passkey.
l
If the target device does not appear, tap Menu > Refresh to search again.
l
This setting is available when Bluetooth is enabled.
l
Change the Name of a Paired Device: From Bluetooth settings, tap Settings
n
paired device name, tap the current name, enter a new name, and tap OK.
Emoji cannot be used in a device name.
l
This setting is available when Bluetooth is enabled.
l
Cancelling Pairing: From Bluetooth settings, tap Settings
n
and then tap FORGET.
This setting is available when Bluetooth is enabled.
l
Enable Service from Paired Device: From Bluetooth settings, tap Settings
n
paired device name, and then tap the listing under Use for.
If a confirmation prompt appears, follow the onscreen instructions.
l
This setting is available when Bluetooth is enabled.
l
This setting is available when the paired device is providing a service.
l
Search for Other Devices: From Bluetooth settings, tap Menu > Refresh.
n
This setting is available when Bluetooth is enabled.
l
Check Files Received via Bluetooth Transfer: From Bluetooth settings, tap Menu >
n
Show received files, and follow the onscreen instructions.
Settings
> Settings
.
next to a
next to a paired device name,
next to a
211