Table of Contents
Advertisement
The DVR/Hard Drive Status fields are:
Field
Enabled
Stream
Indexer Ver.
Content
Record Ver.
Number
Type
Drive
Record
Capacity
Remaining
Number of
Installed
Drives
Drive
Model
Number
Device ID
Type
Total Size
Description
Indicates whether the DVR is enabled, based on the DCT3080
Connected State (CONNECTED or DISCONNECTED) and
resource availability (resource authorized; hard disk installed
and functional):
OSD
LED
Description
True
En
DVR enabled
False
Un
DVR disabled
The stream indexer version number, without leading zeros; for
example, version 0000000065 is displayed as "65"
The content record version number, displayed without leading
zeros
Indicates the encoder number — 1 or 2
Indicates the encoder type — Not Inst(alled), MPEG2, Other, or
Unknown
The drive type — IDE (internal), 1394, USB (external), or NOT
AVAILABLE (neither enabled nor configured)
The remaining recording capacity, in bytes
The number of internal and external hard drives, up to a
maximum of 9
The identification number sequentially assigned to each
installed drive and whether the drive is INTERNAL or
EXTERNAL
The drive model number assigned at the factory
A text string of up to 20 characters that identifies the disk drive;
"N/A" is displayed if the value is invalid or cannot be retrieved
The drive type — IDE, 1394, USB, or Unkn(own)
The drive size in decimal GB. (1 decimal GB = 1x10
example, 120 decimal GB = 120x10
DCT3080 Installation Manual
9
bytes.)
72
9
bytes. For
Advertisement
Table of Contents
