Table of Contents
Advertisement
The User Setting Status fields are:
Field
Description
The aspect ratio. Defaults to 16:9. Options are 16:9 for wide
TV Type
screen TVs or for standard TVs:
The video display format for the component video outputs.
HDMI/YPbPr
Defaults to 1080i. Options are 1080i, 720p, 480p, or 480i. Some
Output
TVs only support certain display formats. Check the TV user
manual for more information.
If you are not using an HDTV, selecting a format other than 480i
causes the on-screen display to go blank. If this occurs, view the
settings on the LED panel to change the format back to 480i.
If you are not using the HDMI video connection, the HDMI/YPbPr
OUTPUT setting displays as YPbPr OUTPUT.
The display format used for 4:3 standard-definition programming.
4:3 Override
Displays whether closed captions are ENABLED or DISABLED.
Closed
Caption
Displays the selected pen size — Auto (controlled by the closed
Pen Size
caption stream), Standard, Large, or Small.
4:3 LETTERBOX places black bars at the top and bottom to
fit high-definition programs on the screen
4:3 PAN/SCAN crops the left and right edges of
high-definition programs to fill the screen
OFF displays non-high-definition programs having a 4:3
aspect ratio in wide screen format. On an HDTV, black bars
display on the left and right of the picture. Selecting OFF for
a 4:3 TV may result in a small picture with black bars around
it.
DCT3080 Installation Manual
67
Advertisement
Table of Contents
