If You Have Forgotten The Password; Trouble Shooting; Component Video Out Connection Maintenance - Marantz DV2400 User Manual

IF YOU HAVE FORGOTTEN THE PASSWORD,

If you have forgotten the password, reset all the
settings by taking the following procedures.
1. Press SETUP button to display the main menu.
2. With Cursor buttons, select "SYSTEM".
With Cursor(3 / 4) buttons, select "DEFAULTS".
3.
4. Press ENTER button, the password input
screen is displayed on TV.
VIDEO AUDIO DISC SYSTEM
OSD LANGUAGE ENGISH
PARENTAL RATING UNLOCK
PASSWORD CHANGE
INPUT PASSWORD
DEFAULTS RESET
SETUP MENU MODE EXPERT
- - - -
PLEASE ENTER PASSWORD
5. Enter "2580" with the numeric buttons on the
remote.
6. Press ENTER button, reset to the default.
• All the settings are reset.
DV2400N DFU_01_eng 3/3 Page 19

TROUBLE SHOOTING

If you believe that a malfunction has occurred, first
check the points listed below. The problem may
have been caused by a simple operational error or a
connection problem. If the problem is not solved
even after carrying out the following checks, consult
your dealer or nearest Marantz sales office or
service center.
The power does not come on.
• Plug in the power plug to the socket completely.
The disc fails to rotate.
• Set the disc the label side up.
• The disc may get dirty or scratched.
• Do not play warped discs.
• This player does not support 8 cm discs.
No sound is output.
• Check the system connections again.
• Check the settings of the controls on the amp,
such as the volume.
No picture on TV.
• Check the connection with TV.
• Check the aspect ratio setting.
• Check if TV's input source selector is set correctly.
The remote control is not working.
• Check that the batteries of the remote control
unit are not exhausted. If they are, replace them
with two new batteries.
Disc can not be played normally.
• Check the region code of the disc.
• Check the parental lock level.
• For fast forward and fast rewind play, picture
may be disordered. It is normal.
• Do not connect the player and TV through VCR.
Copy protection may work and noise may
appear on picture.
MAINTENANCE
Clean the DVD player with a soft, slightly
dampened lint-free cloth. Do not use any cleaning
agents as they may have a corrosive effect.
Do not expose the DVD player, batteries or discs
to humidity, rain, sand or excessive heat (caused
by heating equipment or direct sunlight).
If the DVD player cannot read discs correctly use a
commonly available cleaning disc to clean the lens
before taking the DVD player to be repaired. Other
cleaning methods may destroy the lens. Always
keep the tray closed to avoid dust on the lens.
The lenses may cloud over when the DVD player is
suddenly moved from cold to warm surroundings.
It is not possible to play a disc then. Leave the
DVD player in a warm environment until the
moisture evaporates.
03.9.16, 2:35 PM Adobe PageMaker 6.5J/PPC
19