Important Safety Information - Harman Kardon OMNI 10 Owner's Manual

IMPORTANT SAFETY
INFORMATION
Verify Line Voltage Before Use
The Omni 10 and Omni 20 have been designed for use with 100-240 volt, 50/60 Hz AC current.
Connection to a line voltage other than that for which your product is intended can create a safety
and fire hazard and may damage the unit. If you have any questions about the voltage requirements
for your specific model, or about the line voltage in your area, contact your selling dealer before
plugging the unit in to a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied with your unit. We do not recommend
that extension cords be used with this product. As with all electrical devices, do not run power cords
under rugs or carpets, or place heavy objects on them. Damaged power cords should be replaced
immediately by an authorized service center with a cord that meets factory specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the plug; never pull the cord.
If you do not intend to use your speaker for any considerable length of time, disconnect the plug
from the AC outlet.
3