Harman Kardon OMNI 10 Owner's Manual page 20

Select the blank line and type in the password
for your home network. When you are finished
select the 'Done' button.
If there is no password required, the password
tab will appear gray. Select the 'Done' button to
proceed.
Note: WEP, WPA2 TKIP, and WPA2 AES security
protocols are supported.
Pressing 'Done' on the Select Router page will
auto-connect the router and bring you directly
to this page.
Go to screen three and you will see the slash
LED on the Link button pulse very quickly for up
to one minute. When the product successfully
connects to your home network, the slash LED
will turn solid white.
17