Special Features Of Your Oven Control - GE JCS905 Owner's Manual

Special features of your oven control.

Your new touch pad control has additional features that you may choose to use. The following are the features and
how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain in the
control's memory until the steps are repeated.
When the display shows your choice, press the START pad. The special features will remain in memory after a
power failure.
BROIL
BAKE
GRIL
CUIRE
START TIME
HEURE DE
DEPART
START
DEPART
BROIL
BAKE
CUIRE GRIL
COOK TIME
BROIL
TEMPS DE
GRIL
CUISSON
START
DEPART
BROIL
BAKE
GRIL
CUIRE
TIMER
MINUTERIE
START
DEPART
18
12-Hour Shutdown
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or
after 3 hours during a broil function.
If you wish to turn OFF this feature, follow
the steps below.
Press the BAKE and BROIL pads at
the same time for 3 seconds until
the display shows SF.
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this
to use the Celsius selections.
Press the BAKE and BROIL pads at
the same time for 3 seconds until
the display shows SF.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds
until the OFF pad is pressed. This continual
6-second beep may be canceled.
To cancel the 6-second beep:
Press the BAKE and BROIL pads at
the same time for 3 seconds until
the display shows SF.
Press the START TIME pad until no
shdn (no shut-off) appears in the
display.
Press the START pad to activate the
no shut-off and leave the control set
in this special features mode.
Press the COOK TIME and BROIL pads
at the same time. The display will
show F (Fahrenheit).
Press the COOK TIME and BROIL
pads again at the same time. The
display will show C (Celsius).
Press the START pad.
Press the TIMER pad. The display
shows CON BEEP (continuous beep).
Press the TIMER pad again. The
display shows BEEP. (This cancels
the one beep every 6 seconds.)
Press the START pad.