Omniswitch 6450-U24S; Front Panel - Alcatel-Lucent OmniSwitch OS6450-10 Hardware User's Manual

OmniSwitch 6450-U24S

OmniSwitch 6450-U24S
The OmniSwitch 6450-U24S provides 22 SFP ports, two (2) RJ45/SFP combo ports, two (2) fixed SFP+
ports and a slot (located on the rear panel) for two (2) optional SFP+ stacking/expansion ports.
OmniSwitch 6450-U24S switches support IEEE 1588 Precision Time Protocol (PTP). (PTP is supported
on front panel ports only; PTP is not supported on rear panel expansion modules.)
Note. When PTP is disabled, the OmniSwitch 6450-U24S may be stacked with other stackable OS6450
models. When PTP is enabled, stacking is not supported and the switch operates as a standalone unit.

Front Panel

D
A B C
I
H
Item Description
A Stacking LED
Displays the chassis stack ID.
B Back-lit Power Status LED
Illuminates model name on chassis front panel to indicate "power on" status.
C Console Port
RS-232 console port with an RJ-45 connector. Provides console access to the CLI for
configuration and management.
D System Status LEDs
Provides status on hardware and software.
E Port Status LEDs
Provides status on connectivity and link activity for the switch's 22 SFP ports and two (2)
RJ45/SFP ports.
F RJ45/SFP Combo Ports
Port numbers 23 and 24.
G SFP+ Port LEDs
Displays link status for front panel fixed SFP+ ports.
H SFP+ Stacking/Expansion Module Port Status LEDs
Displays link status for rear panel SFP+ stacking/expansion ports.
I USB Port
High speed USB 2.0 port.
page 3-28
OmniSwitch 6450 Chassis and Hardware Components
E
J
OmniSwitch 6450-U24S Front Panel
OmniSwitch 6450 Hardware Users Guide
F G
K
September 2015