Translated Safety Warnings
Proper Earthing Requirement Warning
To avoid shock hazard:
The power cord must be connected to a properly wired and earth receptacle.
•
•
Any equipment to which this product will attached must also be connected to properly wired recep-
tacles.
Use 22AWG solid copper conductor for ground leads connecting the frame to ground and DC
•
return.
•
Cleaning and dressing of grounding points during installation is strongly recommended. Also, do not
forget the antioxidant.
To ground the equipment properly, connect a Panduit Corporation UL listed Lug, P/N: LCD8-10A-
•
L to the two threaded holes located on the rear using 8AWG copper conductors. Use Panduit Corpo-
ration, P/N: CT-940CH for crimping.
Français:
Pour éviter tout risque de choc électrique:
•
Ne jamais rendre inopérant le conducteur de masse ni utiliser l'équipement sans un conducteur de
masse adéquatement installé.
En cas de doute sur la mise à la masse appropriée disponible, s'adresser à l'organisme responsable de
•
la sécurité électrique ou à un électricien.
Deutsch: Hinweise zur geforderten Erdung des Gerätes
Aus Sicherheitsgründen:
•
darf das Netzkabel nur an eine Schutzkontaktsteckdose angeschloossen werden.
dürfen für den Anschluß anderer Geräte, welche mit diesem Gerät verbunden sind, auch nur Schutz-
•
kontaktsteckdosen verwendet werden.
Español:
Para evitar peligro de descargas:
Para evitar peligro de descargas asegurese de que el cable de alimentación está conectado a una
•
toma de alimentación adecuadamente cableada y con toma de tierra.
•
Cualquier otro equipo a cual se conecte este producto también debe estar conectado a tomas de
alimentación adecuadamente cableadas.
page A-10
Regulatory Compliance and Safety Information
OmniSwitch 6450 Hardware Users Guide
September 2015