Makita HR2010 Instruction Manual
Hide thumbs
Also See for HR2010:
- Instruction manual (45 pages) ,
- Instructional manual (17 pages) ,
- Technical information (6 pages)
Related Manuals for Makita HR2010
Summary of Contents for Makita HR2010
- Page 1 INSTRUCTION MANUAL Rotary Hammer HR2010 003092 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
EC Declaration of Conformity The typical A-weighted noise level determined according Makita Corporation responsible to EN60745: manufacturer declare that the following Makita Sound pressure level (L ) : 86 dB(A) machine(s): Sound power level (L ) : 97 dB(A) Designation of Machine:... -
Page 3: General Power Tool Safety Warnings
Model No./ Type: HR2010 Avoid body contact with earthed or grounded are of series production and surfaces such as pipes, radiators, ranges and Conforms to the following European Directives: refrigerators. There is an increased risk of 2006/42/EC electric shock if your body is earthed or grounded. -
Page 4: Rotary Hammer Safety Warnings
17. If devices are provided for the connection of Use auxiliary handle(s), if supplied with the dust extraction collection facilities, tool. Loss of control can cause personal injury. ensure these are connected and properly used. Hold power tool insulated gripping Use of dust collection can reduce dust-related surfaces, when performing an operation hazards. -
Page 5: Functional Description
Side grip (auxiliary handle) FUNCTIONAL DESCRIPTION 1. Side grip CAUTION: Always be sure that the tool is switched off and • unplugged before adjusting or checking function on the tool. Switch action 1. Switch trigger 003142 The side grip swings around to either side, allowing easy handling of the tool in any position. -
Page 6: Operation
Depth gauge Drilling in wood or metal 1. Depth gauge 1. Drill chuck 2. Chuck adapter 2. Clamp screw 3. Grip base 4. Side grip 003180 003223 The depth gauge is convenient for drilling holes of Use the optional drill chuck assembly (consisting of drill uniform depth. -
Page 7: Optional Accessories
Plastic carrying case and unplug the tool. • Remove the crank cap using a Makita lock nut wrench NOTE: (optional accessory). Rest the tool on the table with the Some items in the list may be included in the tool bit end pointing upwards. - Page 8 Makita Corporation Anjo, Aichi, Japan www.makita.com 884037D229...