Common Screen Operations - Kenwood DDX6902S Instruction Manual

BASICS BASICS
❏ Adjusting the volume
To adjust the volume
You can adjust the volume for the following four
situations.
• While listening to a source (0 to 35)
• During a call (0 to 35)
• During voice guidance (0 to 35)
• While receiving Traffic Information (0 to 35)
Turn to the right to increase, and turn to the left to
decrease.
To attenuate the sound
The ATT indicator lights up.
To cancel the attenuation: Press the same button
again.
❏ Turning off the screen
(Hold)
• This operation works only when <ATT Key Long
Press> is set to [V-OFF]. (Page 60)
To turn on the screen: Press and hold the volume
knob on the monitor panel, or touch the display.
❏ Putting the unit in standby
1
Display all <TOP MENU> items.
On the <TOP MENU> screen:
2

Common screen operations

❏ Common screen descriptions
You can display other screens any time to change
the source, show the information, or change the
settings, etc.
Source control screen
Performs source playback operations.
• The operation buttons vary depending on the
selected source.
1
2
3 4
Common operation buttons:
1 Displays other operation buttons.
• Disabled when there are no other buttons.
2 Switches between the normal source control
screen and easy control screen. (Page 8)
3 Displays the <TOP MENU> screen. (Page 8)
• Pressing B MENU on the monitor panel also
displays the <TOP MENU> screen.
4 Displays/hides short-cut buttons. (Page 9)
Continued on the next page...
ENGLISH 7