Tap Mode; Numeric Mode; Symbol Mode - Motorola W375 User Manual

tap mode

Press # in a text entry screen to switch to TAP
mode. If you do not see g or m, press M > Entry
Setup to set TAP mode as your Primary or Secondary
text entry mode.
To enter text in TAP mode, press a keypad key
repeatedly to cycle through the letters and
number on the key. Repeat this step to enter
each letter.
For example, if you press 8 one time, your
phone displays:
Character
Message 765
displays at
T
insertion
point.
OK
Press to
accept &
store text.
OK
After 2 seconds, the character is accepted
and the cursor moves to the next position.
40 basics
DELETE
Press to
erase the
character to left of
DELETE
insertion point.

numeric mode

In a text entry screen, press # to switch
entry modes until the 12 (numeric) indicator
displays.
Press keypad keys to enter the numbers you
want. When you finish entering numbers,
press # to switch to another entry mode.

symbol mode

In a text entry screen, press # to switch
entry modes until the @ (symbol) indicator
displays.
Press keypad keys repeatedly to cycle through
its symbols. Highlight the symbol you want,
then press SELECT.