Check Battery Meter; Tty Operation - Motorola W260g User Manual

check battery meter

Find it: s w
> Settings > Phone Status > Battery Meter

tty operation

You can use an optional TTY device with your phone to
send and receive calls. You must plug the TTY device
into the phone's headset jack (see page 2) and set the
phone to operate in one of three TTY modes.
Note: Use a TSB-121 compliant cable (provided by the
TTY device manufacturer) to connect the TTY device
to the phone.
Note: Set the phone volume to level 4 (middle setting)
for proper operation. If you experience a high number
of incorrect characters, adjust the volume as needed
to minimize errors.
Note: For optimal performance, your phone should be
at least 12 inches (30 centimeters) from the TTY
device. Placing the phone too close to the device may
cause high error rates.
set TTY mode
When you set your phone to a TTY mode, it operates
in that mode whenever the TTY device is connected:
Find it: s w
> Settings > Initial Setup > TTY Setup
Scroll to one of the following options and press SELECT:
TTY option
Voice Set to standard voice mode.
TTY Transmit and receive TTY
characters.
VCO Receive TTY characters but
transmit by speaking into the
microphone.
basics 25