Advertisement
Electric Shock Precaution
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
DANGER:
WARNING:
CAUTION:
CAUTION:
SERVICE
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. For service we suggest you return the product
to your nearest authorized service centre for repair.
When servicing, use only identical replacement parts.
WARNING:
Observe all normal safety precautions related to
avoiding electrical shock.
SPECIFICATION
MODEL
RHT500R
Voltage:
220-240 V~
50Hz
Power:
500 W
Cutting capacity:
24 mm
Blade length
550 mm
Blade speed
1500 SPM
Brake time:
<1s
Weight (without
3.5 kg
cord):
Sound pressure
L pA : 84 dB(A)
level:
Sound power level: L wA : 99 dB(A)
a h = 3.7 m/s 2
Vibration:
DESCRIPTION
Fig.1
1. Scabbard
2. Cutting blades
3. Safety Guard
4. Front trigger
ENGLISH (Original Instructions)
Remove plug from the mains immediately if cable is damaged or cut.
Indicates an imminently hazardous situation, which, if not avoided, will result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
RHT600RL
220-240 V~
50Hz
600 W
27 mm
600 mm
1500 SPM
<1s
3.8 kg
K pA : 3.0 dB(A)
K wA : 3.0 dB(A)
K= 1.5 m/s 2
MEANING
5. Rear handle with trigger
6. Livetool indicator™
7. Cord retainer
8. Lock lever for rotating handle
9. HedgeSweep™ debris sweeper
(only included in RHT600RL, optional available for
RHT500R)
10. Rear handle trigger
OPERATION
WARNING:
Always remove the scabbard before using the
hedge trimmer.
Warning:
1. The blades continue to move for a fraction of a
second after the hedge trimmer is switched off.
2. Do not touch the moving blades.
3. When using the tool always ensure that the cord is
safely held in the cord retainer as described later in
this manual.
INTENDED USE
This hedge trimmer is intended for cutting and trimming
hedges and bushes in domestic use. It is not intended to
be used for cutting above shoulder level.
USING THE CORD RETAINER
When using the hedge trimmer make sure that you
secure your extension cord in the cord retainer as shown
in Figure 3.
If you bought this unit in the United Kingdom with a BS
plug it will have a long cord attached to it. In that case
please secure the cord coming out of the hedge trimmer
in a similar way as shown in Figure 3.
USING THE ROTATING REAR HANDLE (Figure 9)
1. Place the hedge trimmer on a flat and even surface
and disconnect from the power supply
4
Advertisement
