Dial Mode; Temporarily Switch From Pulse To Tone Dialling; Registration; Register A Handset - Motorola IT.6.1X User Manual

M
1. Press , scroll
d
2. Scroll to Recall Time
u d
e
3. Press or to select the setting you want: Short, Medium, Long.
M
4. Press to confirm.
5. Press to return to standby.
NOTE
The functionality of your IT.6X cannot be guaranteed on all PABX.
SHORT-100ms, MEDIUM-250ms & LONG-600ms.
8.5

Dial mode

The default IT.6X dialling mode is suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
M
1. Press , scroll
d
2. Scroll to Dial
u d
e
3. Press or to select
M
4. Press to confirm.
5. Press to return to standby.
8.5.1

Temporarily switch from Pulse to Tone dialling

1. In talk mode press and hold
The dial mode will change from Pulse to Tone for the duration of the call.
8.6

Registration

Up to 4 handsets can be registered to one base station. Additional handsets must be
registered to the base before you can use them.
• The Master PIN is required before you can register or unregister handsets. The default
PIN is 0000.
8.7

Register a handset

At the base:
1. Press and hold the
which to register a handset.
On the handset:
M
1. Press , scroll
d
2. Scroll to Register
3. When the display shows PIN, enter the base PIN and press
When the handset registers with the base, it is assigned a handset number.
Advanced settings
d
to Advanced Set
is displayed. Press
d
to Advanced Set
M
Mode. Press .
Tone or Pulse.
l
for 2 seconds.
p
button on the base for 5 seconds. You have 120 seconds in
d
to Advanced Set
M
and press .
M
and press .
M
.
M
and press .
M
and press .
M
.
31