12
OVERVIEW
CONTROL PANEL OVERVIEW
Cooktop Element Control
NOTE
Cooktop Element Controls are set up in the same order as the
corresponding elements.
HS (Hot Surface) Indicator
The HS indicator will appear in the display once the element is turned o or during the self clean cycle. The HS indicator will
stay on until the surface has cooled to approximately 150˚F/66˚C or when the self clean cycle ends.
PF (Power Failure) Indicator
The PF indicator will appear in the display if there has been a power interruption to the appliance. To clear the PF error, press
the CLEAR OFF button and reset the clock with the correct time of day.
Features
Dual Element
Number Buttons
Oven Controls
Single Elements
Start/
Lockout
Button
Clear O
Button