Table of Contents
Advertisement
12
Introduction to Batteries
Each battery is shipped in an uncharged state with a protective
clip on it. Before you can use your phone, you will need to
remove the clip from the battery and charge it.
Battery Clips
It is a good idea to save the protective clip to store and carry the
battery when not in use. The clip prevents objects from touching
the battery terminals, thereby reducing the risk of injury or
damage from a short circuit.
Removing the Main Battery Clip
1. Press
Tab
2. Remove
Clip
2.
Attaching the Main Battery Clip
1. Insert
Side
2. Click
Latch
2.
Hold one end of the battery/clip in one hand.
Press down on the tab at the opposite end of
the clip with your other hand.
Rotate the clip away from the battery.
Insert one end of the battery into the clip, so
that the battery fits the notches on the clip.
Click the other side of the battery into place.
1.
1.
Advertisement
Table of Contents
