Introduction To Batteries - Motorola Timeport Phone Owner's Manual

12

Introduction to Batteries

Each battery is shipped in an uncharged state with a protective
clip on it. Before you can use your phone, you will need to
remove the clip from the battery and charge it.
Battery Clips
It is a good idea to save the protective clip to store and carry the
battery when not in use. The clip prevents objects from touching
the battery terminals, thereby reducing the risk of injury or
damage from a short circuit.
Removing the Main Battery Clip
1. Press In
Latch
2. Remove
Battery
Attaching the Main Battery Clip
1. Lower
Side
2. Click
Latch
Press in the release latch.
Rotate the battery upward and lift it out of
the protective clip.
2.
1.
Lower the side opposite the release latch into
the clip.
Drop the side with the release latch down
until the latch clicks.
1.
2.
Release Latch