Thermador PRD304GHC Installation Manual page 15

Mounting Anti-Tip Bracket
The floor mounted bracket shall be installed as follows:
1. Place bracket on floor in position shown in Figure 8.
• 30" and 36" bracket may be used in either corner of
the installation area.
2. Secure to floor and wall stud using the (4) 1½" (38 mm)
Phillips head screws provided.
3. Later, when the unit is installed, the adjustable leg will
slide under the bracket, as shown in Figure 9.
4. If the range is moved to a new location, the Anti-Tip
Device must be removed and reinstalled.
English 12
Figure 8: Placement of Anti-Tip Bracket
Figure 9: Anti-Tip Bracket