Osd (On Screen Display) On/Off - Sanyo VHR-VK920A Instruction Manual

OSD (On Screen Display) ON & OFF
This VCR is set to "OSD (On Screen Display) ON" mode at the factory, but you can change it to OFF
mode. When a function is changed at the front display or remote control the change will be
displayed on the screen.
1
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM
2 CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
*
OSD ON/OFF
PR+/-:SELECT
OK:CONFIRM
3
ON
OFF
PR+/-:SELECT
OK:CONFIRM
*
Though the "16:9 SET" is displayed on the screen, this function is not available for this set.
16
MAIN MENU
MENU:END
VCR SETUP
MENU:END
OSD ON/OFF
MENU:END
Press MENU.
Choose "VCR SETUP"
And press OK.
Choose "OSD ON/OFF".
If you want OSD OFF mode, press PR- and press
OK.
OSD characters will not be displayed in the normal
picture at the start of each mode change.