Table of Contents
Advertisement
Memorizing the Channels & Setting Channels
Auto Channel Scan
CHANNEL
Color System
Sound System
Country
Auto Scan
Manual Scan
Channel Edit
Move
Enter
CHANNEL
Color System
Sound System
Country
Auto Scan
Manual Scan
Channel Edit
Move
Enter
Channel Scan
Total Channel
4
96.75MHz
Exit
Manual Channel Scan
CHANNEL
Color System
Sound System
Country
Auto Scan
Manual Scan
Channel Edit
Move
Enter
Manual Scan
Current Channel 2
65.75MHz
Adjust
Exit
When you turn on the TV for the first time, you should perform an auto
channel scan to set up stations on your TV.
Note: Be sure to select the TV input source before operation.
AUTO
BG
To auto scan for channels:
Others
1
2
Return
3
AUTO
BG
Others
4
Return
5
If desired programs can not be searched by Auto Scan, you can make use
of Manual Scan to search programs manually.
To manual scan for channels:
AUTO
BG
1
Others
2
3
Return
4
5
Press MENU. The on-screen menu opens.
Press 6
or 5
to display CHANNEL menu, then press ENTER.
Press 6
or 5
to highlight Country, then press 4
select your local area and then press ENTER. If no choice meets,
please select Others.
Press 6
or 5
to highlight Auto Scan, then press ENTER.
The TV begins scanning for available channels in your area and stores
them into memory. This may take several minutes, please wait.
During the process, you may press EXIT to stop the auto scan, but
you will need to run the auto scan again to set up stations on your TV.
To exit, press EXIT button.
Use channel select buttons to select a current position number.
Go to CHANNEL menu.
Press 6
or 5
to highlight Manual Scan, then press ENTER.
Press3
to scan towards lower frequency, press4
higher frequency. If the program found is not the one you desire, press
3
/4
until you get the desired program, then this program is stored
in the current channel position.
To exit, press EXIT button.
14
, use 6
or 5
to
to scan towards
Advertisement
Table of Contents
