Patrol Settings Interface - Lorex LNC254 series User Manual

10 L-View for PC
To save the camera password:
1. Right-click on the camera in Camera List and click ID/Password settings.
2. Under Name, enter a name for the camera that will appear in Camera List. This can be
anything of your choice.
3. Under Password, enter the camera password to save the password in L-View.
4. Click OK.

10.3.3 Patrol Settings Interface

Open your camera's patrol settings by clicking Patrol from the L-View home screen.
1. Checkbox: Enable/disable the patrol point as part of your patrol route.
2. Go to: Move your camera to the patrol point.
3. Set: Save your camera's current position as a patrol point.
4. Save patrol points: Save your changes to patrol points.
5. Stay time (sec): The number of seconds your camera stays in each patrol point before
moving to the next.
6. Speed: The rate your camera to moves between patrol points, 1 (slowest) to 3
(fastest).
7. Direction keys: Move your camera up/down/left/right. Click H to return your camera to
its default position.
8. Cancel: Exit the patrol settings window without saving your changes.
#LX400072; r.28402/28402; en-US
39