Audio Settings - Lorex E893DD Series Quick Start Manual

Audio settings

ATTENTION:
and/or use of listen-in audio without consent is illegal in certain jurisdictions. Lorex Corporation
assumes no liability for use of its products that does not conform with local laws.
To enable audio recording and listen-in audio from the NVR:
1. From the camera's live view, right-click and then click Main Menu.
2. Enter the system user name (default: admin) and password.
3. Click Camera and select Recording.
4. Under Channel, select the channel connected to the audio-capable camera.
5. Under Main Stream, click on the button More Setting.
6. In the the pop-up window:
A. Enable Audio Encode for audio recording
and listen-in audio. (Note: Listen-in audio
requires a monitor with speakers or
speakers connected to the NVR.)
B. Select the Audio Format that will be used
to record audio. ACC is recommended.
7. Click OK to save changes.
Audio recording and listen-in audio are disabled by default. Audio recording
16