3.
Insert the SSD into the connector on the computer.
4.
Place the SSD bracket over the SSD and tighten the screws to secure it to the computer.
5.
Install the:
a.
battery
b.
base cover
6.
Follow the procedure in
Removing the optional PCIe SSD
1.
Follow the procedure in
2.
Remove the:
a.
base cover
b.
battery
3.
To remove the PCIe SSD:
a. Remove the screws that secure the SSD bracket to the SSD [1].
b. Remove the SSD bracket [2].
c. Remove the SSD from the computer [3].
Removing the memory module
1.
Follow the procedure in
2.
Remove the:
a.
base cover
b.
battery
3.
Pull the clips securing the memory module until the memory module pops up [1].
4.
Remove the memory module from the system board [2].
12
After working inside your
Before working inside your
Before working inside your
computer.
computer.
computer.