Installing The System Board; Removing The Coin-Cell Battery - Dell Latitude E5470 Owner's Manual

Installing the system board

1. Align the system board with the screw holders on the computer.
2. Tighten the screws to secure the system board to the computer.
3. Connect the speaker cable to its connector on the system and route the cable through its routing
channels.
4. Connect the speaker, power connector and coin cell battery cables to the connectors on the system
board:
5. Install the:
a. power connector port
b. WLAN
c. heat sink assembly
d. WWAN
e. dock frame
f. hard drive assembly
g. keyboard
h. memory module
i. battery
j. base cover
6. Follow the procedure in
Removing the coin cell battery
1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
c. memory
d. hard drive assembly
e. keyboard
f. dock frame
g. WLAN
h. WWAN
i. heat sink assembly
or M.2 SSD or PCIe SSD
After working inside your
Before working inside your
or M.2 SSD or PCIe SSD
computer.
computer.
25