Installing The Processor; Removing The Speaker - Dell OptiPlex 3040M Series Owner's Manual

NOTE: After removing the processor, place it in an antistatic container for reuse, return, or
temporary storage. Do not touch the bottom of the processor to avoid damage to the
processor contacts. Touch only the side edges of the processor.

Installing the processor

1. Align the processor with the socket keys.
CAUTION: Do not use force to seat the processor. When the processor is positioned
correctly, it engages easily into the socket.
2. Align the pin-1 indicator of the processor with the triangle on the socket.
3. Place the processor on the socket such that the slots on the processor align with the socket keys.
4. Close the processor shield by sliding it under the retention screw.
5. Lower the socket lever and push it under the tab to lock it.
6. Install the:
a. heat sink
b. system fan
c. hard drive assembly
d. cover
7. Follow the procedure in

Removing the speaker

1. Follow the procedure in
2. Remove the:
a. cover
b. system fan
3. To remove the speaker:
a. Release the speaker cable from the retention hooks on the system fan [1].
b. Remove the screws that secure the speaker to the system fan [2].
c. Remove the speaker from the system fan [3].
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
15