Motorola Timeport Phone Owner's Manual page 22

Tip:
You can choose
how long the
backlight
remains ON.
See page 100.
22
Turning Your Phone On
Dual Band / Dual Mode Operation
To make the best use of available signals, your phone can
operate on both CDMA digital and analog systems. If your phone
finds a CDMA digital system, you will see the time and date and
the icon. If your phone finds an analog system, you will see
the icon.
0 7 / 0 7 / 9 9
Ready
Digital
Quad Number
Your phone can be activated with
up to four unique phone
numbers. If more than one
number is programmed, you will
see the currently active number
whenever you turn ON the phone. Turn to Changing Your
Number on page 92 if you want to change the active number.
Power Save Mode
If you travel outside the range of available networks, your phone
continues to search for a signal. To save power, it stops searching
every couple of minutes. When this is the case, you will see:
. Your phone will automatically begin searching
Power Save
again in a minute or two – if you would like it to start searching
immediately, just press any key.
Standby Mode
To conserve energy, your phone enters standby mode and turns
off the backlight when you have not touched a key for a few
seconds. The backlight will come back on as soon you press a
key or open the phone.
Ready
Analog
Number 2
312-555-1212