LG PF1000U Owner's Manual page 78

78
CUSTOMIZING SETTINGS
Menu
Colour
Temperature
Colour
Management
System
* Depending on input signal or other picture settings, the range of detailed
items for adjustment may differ.
In Expert mode, you can customize the options of
each mode.
Gamma: Select 1.9, 2.2,or 2.4.
a. Method: 2 Points
- Pattern: Inner, Outer
- Points: Low, High
- Red/Green/Blue: The adjustment range for
each colour is from -50 to +50.
- Apply to all inputs: The values of the Colour
Temperature is applied to all the input modes.
b. Method: 20 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit
indicating the size of a video signal and can be
set to 5,10,15, ... 100. You can fine-tune for
each setting as shown below.
- Luminance: The adjustment range is 50 to
500.
- Red/Green/Blue: The adjustment range is -50
to +50.
- Apply to all inputs: The values of the Colour
Temperature is applied to all the input modes.
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow
colours. Allows an expert to adjust the tint using a
test pattern. Six colours (Red/Green/Blue/Cyan/
Magenta/Yellow) can be selectively adjusted without
affecting other colours. You may not see colours
change on a normal picture even after adjustment.
- Saturation Red/Green/Blue/Cyan/Magenta/
Yellow, Tint Red/Green/Blue/Cyan/Magenta/
Yellow, Luminance Red/Green/Blue/Cyan/
Magenta/Yellow:
The adjustment range is -30 to +30 each.
Description