Additional Options; Adjusting Aspect Ratio - LG PF1000U Owner's Manual

34
USING THE PROJECTOR
Additional Options
Adjusting Aspect Ratio
• Select SETTINGS → PICTURE → Aspect Ratio to change the aspect
ratio.
NOTE
• Available picture size may differ depending on the input signal.
• You can also use the Q.MENU button.
Menu
16:9 Resizes images to the 16:9 ratio.
Displays video images in the original size without
removing parts of the edge of the image.
Just Scan
•
When your projector receives a wide screen signal it will
Original
automatically change to the picture format broadcasted.
When projector receives the wide screen signal, it will let
you adjust the picture horizontally or vertically, in a linear
proportion,to fill the entire screen fully. 4:3 and 14:9 video
Full Wide
is supported in full screen without any video distortion
through DTV input.
•
4:3 Resizes images to the previous standard 4:3.
You can view a picture format of 14:9 or a general
projector programme in the 14:9 mode. The 14:9 screen
14:9
is viewed in the same way as in 4:3, but is moved up or
down.
Resizes the image to fit the screen width. The top and
bottom parts of the image may be cut off.
Zoom •
•
If you select Just Scan, you may see image noise at
the edge or edges of the screen.
In Analogue/DTV/AV mode, Full Wide is available.
Press the or
image.
Press the or
Description
button to zoom in or out of the
button to move the image.