Installing A Switch; Installing The Switch Into A 19-Inch Rack Using Mounting Brackets; Introduction To Mounting Brackets - H3C S5120-SI Series Installation Manual

3

Installing a Switch

On a mounting screw of the chassis of the H3C series switches, there is a seal labeled. You need to
keep it intact before asking the agent to maintain the switch. You need to get the permission of the local
agent before you can open the chassis. Otherwise, you will be responsible for irreversible damages
caused by your operations.

Installing the Switch into a 19-Inch Rack Using Mounting Brackets

The S5120-SI series is shipped with a pair of mounting brackets to fix and support the switch. Figure 3-1
shows how to install a S5120-SI series into a 19-inch rack.
Figure 3-1 Install a S5120-SI series into a 19-inch rack

Introduction to Mounting Brackets

Table 3-1 Mounting brackets for the S5120-SI series
Model
S5120-20P-SI
S5120-28P-SI
S5120-52P-SI
Mounting bracket
Two-holed mounting
brackets (standard)
Four-holed mounting
brackets (standard)
3-1
Description
Figure 3-2 shows the appearance.
Figure 3-3 shows the appearance.