H3C S5120-SI Series Installation Manual page 41

After the system displays "Enter your choice(0-3):", enter 1 to enter the protocol parameter setting
menu.
All the Boot ROM files to be loaded are complete Boot ROM files.
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):
The items in the protocol parameter setting menu are described in Table 5-3.
Table 5-3 Description of the protocol parameter setting menu
Item
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
3) Configure the switch to download files using XMODEM
Enter 3 to enter the download rate setting menu.
Please select your download baudrate:
1.* 9600
2. 19200
3. 38400
4. 57600
5. 115200
0. Return to boot menu
Enter your choice(0-5):
4) Set the download rate of the console port on the switch
Select an appropriate download rate. For example, if you select 115200 bps, that is, enter 5, the
following information is displayed:
Download baudrate is 115200 bps
Please change the terminal's baudrate to 115200 bps and select XMODEM protocol
Press enter key when ready
Description
Set TFTP parameters
Set FTP parameters
Set XMODEM parameters
Return to the Boot ROM menu
5-5